KOZY KOLLAR
SPECIFICATIONS
Materials
| Roof Collar | Molded using an EDPM (Ethylene-Propylene-Diene-Terpolymers) rubber compound. |
| Main Frame | Located inside the Roof Collar and forms the outer flange is die cut from .125 inch steel. |
| Case Hardened Nuts | Six hardened steel (12L14) �-20 female standoffs are pressed into the Main Frame. Torque: shear point, 22 ft/lbs. (installation torque 8 ft/lbs. |
| Lower Mounting Plates | Two .104" galvanized steel plates 10.25" long + 1.50 wide |
| Rod Couplings | Six 7/8" + 1/4-20 zinc plated nuts |
| Studs | Six 2 �" + 1/4 -20 zinc plated threaded rod |
| Dimensions | Roof Collar; Length 11.5", Width 8", Height 2.5" |
| Weight | 4.5 pounds per unit |
Back to the Kozy Kollar Home Page
Copyright Kozy Kollar Manufacturing Inc. 2006
AllRights Reserved.